Operati&ons
Projects
Schedule
Project name:
New
Remove
Project type:
Run external application or batch file
Command line:
Start invisible, without displaying window
Launch on:
Create New Project
Project
Invalid project name. Must not be blanks and must be a yet non-existing name. 
Save
Restore Default Projects
Start
Time
Can run later
Ask before run
Fix time
After load
Delete
Add new project to the list
Project save error.
Do you want to run this project?
Project Start
Project start error.
Comment:
Browse
Executables|*.exe;*.bat;*.com|All files|*.*
Enabled
Do you want to save the modified configuration?
Are you sure you want to delete this project?\nThe project will be removed also from the schedule.\nNumber of schedule options for this project: 
Are you sure you want to delete the project?
Transfer files and folders
Source
Destination
Configure
Add
Exceptions
Please specify the files to be excluded by the application:
The files specified here will be ignored by Hard Disk Sentinel. They will not be copied and they will be not affected by any options.
Global Settings
Project Operations
Project Options
The contents of these folders will be saved to the specified destination folder(s).
Source folder
Destination folder
File mask
Folder Settings
The destination folder will be automatically created (if necessary). It is possible to use the following variables to specify a folder:\n\n%USER% - name of the user\n\n%COMPUTER% - name of the computer\n\n%IP% - IP address of computer\n\n%LAST=folder% - name of the lastly created/modified (newest) folder in the specified folder\n\nIt is possible to specify two or more destination folders, please separate them by ; (semicolon).
Please select or specify at least one source folder.
Please specify a valid destination folder.
Edit
Calculate the amount of data to be copied
Verify copied data
Copy only new and updated files
Clear archive bit on copied files
Delete source files after successful copy
Use the current date as folder name and keep the last
complete archives
(The previous archives will be automatically deleted before starting the actual save operation)
Status:
File:
Amount of data:
Saving Data
Calculating amount of data
Copying files
Updating files
Deleting previous archive
Verifying archive
 MB/sec
minutes remaining
seconds remaining
Folder:
Destination:
Save subfolders
After completion
Send/display report only if a problem occurred
Send/display report in all cases
Do not send or display report
Are you sure you want to delete the source files after archiving?\n(To maximize data security it is recommended to use this option only if you archive the files in two or more copies or if the "verify copied data" option is enabled.)
Deleting source files
Completed
Project successfully completed
Project status
Error occurred during execution of the project
Number of files saved:
Total time elapsed:
List of errors
Total amount of data saved:
Do not show the save progress window
Tasks successfully completed
Cancelled
No data to save
Unable to open file list to verify from this folder: 
Unable to delete: 
E-mail configuration is incomplete
E-mail sending failure
Unable to open file: 
Unable to create file: 
Unable to read file: 
Unable to write file (disk full or not writable): 
Unable to verify file: 
Missing CRC checksum value: 
Incorrect CRC checksum value: 
Start Now
Operation priority
Idle
Normal
Maximum
Destination folder open error
After load 1/day
Repetitive
After: 
Automatic
Suspend on next such day
Any hard disk
The following project will not be executed because an other pending project is disabled.
Do you want to modify the settings?
Processing report
File save operation started. If you see this message, the save operation was aborted.
This version of Hard Disk Sentinel PRO is unregistered.\nIn the registered version it is possible to remove the question dialog to allow backup projects to be launched automatically.\n\nPlease visit our webpage at \n\nhttp://www.hdsentinel.com\n\nfor the instructions about registering the application.\n\nDo you want to open our website now?
Sound alert on problem
Do not start if the amount of data is less than
kbytes
Issue alert if not enough data
Save source folder name with its contents also
Burn CD/DVD by using NERO
Compress files by using RAR
Compress files by using 7-Zip
Select Application
View Command Line
Target drive:
Media:
Speed:
Burn-proof
Parameters:
Target file:
Multiple volumes, volume size: 
The location of Nerocmd.exe is not specified.
The location of RAR.exe is not specified.
The location of 7Z.exe is not specified.
Do you want to configure it now?
Partial Configuration
(Press CTRL+C to copy the contents of the window to the clipboard).
Alert on error
Alert will be generated (based on the configured message settings) if the external application completed with an exit code other than 0.
Verify write
External Application Error
The following command line completed with an error: 
Error code of the application: 
Wake-on-LAN option should be enabled on target computer.
Wait until the computer is ready (answers to PING)
Stop trying if no response for 
Target computer:
Action:
Restart
Standby
Hibernate
Source file(s):
Source folder(s):
Multiple mails, one file per mail
FTP server:
Passive mode
Export registry items
Power ON computer
Power OFF computer
Send files in e-mail
FTP transfer files
Upload files to HDS Server
Root node:
Key:
Please specify a registry key to export.
No Key Specified
Remote folder:
Select computer or enter as \\computername
Exporting registry items ...
Starting computer(s)
Remaining seconds before cancel:
&Cancel Now
Waiting
Response
Shutting down ...
Shutdown initiated from
Specify target computers separated by ,\nSpecify . for local computer\nNote: standby and hibernate is not available on remote computers
Transfer retries:
Delay between retries (sec):
Transfer error.
Collect files until the total size reaches 
Test hard disk(s)
Run test on all available hard disks
Drive(s) to test:
Unable to test hard disk
Hard disk test failed
Hard disk test results:
Supported self tests:
Hard disk test details
new reallocated sectors found
new spin retry errors found
new reallocation events found
new pending sectors found
pending sectors fixed
new off-line uncorrectable sectors found
Copy files from source to target
Update data on target and keep files on target which removed from source
One way synchronization
Update data on target and remove files from target which removed from source
Two way synchronization
Update data on both source and target by keeping the most recent files on both locations
Backup Control
Synchronization Options
Total files removed from target:
Total data updated on target:
Total data copied to source:
Process Files Only
Matching specified filters
Configure File Filters
Between dates
and
Not older than
With size
With attributes
Archive
Read only
Hidden
System
Create and use CRC files to store file CRC values
Including Files Matching
Excluding Files Matching
File mask:
weeks
months
years
\1  contains the complete list of errors.
Total number of errors found:
Configure Folders To Backup
Use checkboxes to select SOURCE folders or enter folders separated by ; below the list of folders
Select TARGET folder or enter its path below the list
All source files from all source folders will be archived to the same target if this option is DISABLED.\nThis may cause problems because of losing path information.
Using one or two way synchronization with this option may cause incomplete archive.
Are you sure you want to continue?
Pause
Continue
Paused - Press Continue button
Ignore files in use (not shareable)
Disable warning notification message