Hard Disk Sentinel Is Already Running.
Error
Hard Disk Temperature
Failure Predicted
OK
Supported
Not supported
Yes
 &Hard Disk Drives 
Select the hard disk(s) you want to view in the status window. Double click to select system tray icons. Right click to display local menu.
No.
Name (Size)
Temperature
Tray Icon
 &Preferences 
Display status window at start
Load with Windows
Transparency:
Language:
&Close
Hard Disk Sentinel
Select this drive to show its temperature in system tray
&Show Status Window
&Hide Status Window
&Configuration
E&xit
At least one hard disk must be selected.
 &Status Window  
Background Color
Background Image
Select
Error opening image file.
Supported Image Files|*.jpg;*.bmp|All files|*.*
Information
S.M.A.R.T.
Disk Performance
Partitions
Disk Information
Transfer Rate Information
Total Data Read
Total Data Write
Current Transfer Rate
 KB/s
Current Read Rate
Current Write Rate
Current Disk Activity
Disk Activity %
Transfer Rate (MB/s)
Hard Disk Summary
Hard Disk Number
Hard Disk Model ID
Firmware Revision
Hard Disk Serial Number
Total Size
ATA Information
Hard Disk Cylinders
Hard Disk Heads
Hard Disk Sectors
Total Sectors
ATA Revision
Bytes Per Sector
Bytes Per Logical Track
Buffer Size
Multiple Sectors
Error Correction Bytes
Unformatted Capacity
Maximum PIO Mode
Active PIO Mode
Maximum UDMA Mode
Active UDMA Mode
ATA Features
Supported
Not supported
Attribute
Threshold
Value
Worst
Data
Status
Partition Information
Logical Drive
Total Space
Free Space
Partition Type
bytes
Used Space
Disk:
Maximum Transfer Rate
Estimated Max. Transfer Rate
DVD Write Speed
Larger disk utilization needed for the measurement.
OK (Always passing)
Fail (Always failing)
Advisory: Usage limit exceeded
Pre-Failure: Data loss predicted
Copy entire page to clipboard
Hard Disk &Temperature History
since installation
About
&Registration
Registration Name:
Registration Key:
Invalid registration key, registration failed.
Registration successful. Thank you for your support.
Display main window when started
Available only after registration and activation.
Unregistered version, please register.
Registered to:
Overview
Current Temperature:
Maximum Temperature (today):
Temperature status is good.
Current temperature is too high. It is recommended to use a hard disk cooling device (for example a fan or passive heatsink) if possible.
Current temperature is good but previously it was too high. It is recommended to use a hard disk cooling device (for example a fan or passive heatsink) if possible.
Performance:
Health:
Excellent
Good
Fair
Acceptable
Bad
No actions needed.
It is recommended to backup often to prevent data loss.
&Properties
Hard Disk &Overview
&Previous Hard Disk
&Next Hard Disk
&Alerts
Send e-mail alert if hard disk failure predicted
Send e-mail alert if hard disk temperature is over
&E-mail Configuration
Mail account:
Sender name:
Sender e-mail:
Recipient e-mail:
SMTP server:
Authentication Options (Leave these fields blank if not required)
Username:
Password:
Default
The following field must be specified in order to send the e-mail:
Do you want to enter this information now?
Error while sending alert e-mail.
Alert e-mail sent.
Overheat
Temperature threshold setting:
Temperature Unit:
Sending Report
Font:
Save
Display only the highest temperature on tray
Transferred data unit:
Acoustic Management Configuration
Disabled
Enabled
Current Acoustic Level
Recommended Acoustic Level
Unknown
Max performance and volume
Min performance and volume
Balanced performance and volume
Acoustic Management
Default
Average Reads Per Day
Average Writes Per Day
Snap to screen edges
Warning
Send/display message
Shut down
When failure expected
When temperature is too high
When a new log entry is added
Send daily status e-mails
At
Critical value degradation
Current status
Status e-mail sending error.
Status e-mail sent successfully.
&Update
Find new version and update weekly
Check for new version now
Last check date:
No checks made
Cancel
Installed version:
Most recent version:
Updating files
Current file:
Entire process:
The current software version is up to date.
Error while downloading. Please verify the network and try again.
Update successfully completed.
Status: Checking available version
Status: Downloading
Close
Hard disk not found.
S.M.A.R.T. functionality is missing. You need to copy the file Smartvsd.vxd from Windows\System folder to Windows\System\IoSubsys folder and restart your computer. Please check Help -> Installation for details.
System administrator rights needed to access hard disk information.
Log
Number of problems logged:
Note: The registered version can send alert e-mails and turn off the computer when a new hard disk problem is found and logged.
No problems logged.
The status of the hard disk is stable.
Warning: hard disk status is degraded in the past days.
Date
Previous Value
New Value
Warning: multiple problems found in the past days.
A previously working hard disk is not responding. It is possible that the operating system stopped the device to prevent (further) problems.
Program status:
Error reading activation information.
Successfully registered and activated.
Registered but not activated.
Not registered and not activated.
Registration And Activation On-Line
Registration And Activation By E-Mail
Activation file is saved as
Please send this file with your registration name and registration key to info@hdsentinel.com  In reply, you'll receive your registration file which should be loaded by the Load Activated Keyfile button (or it is possible to manually copy to the folder of this software) to make the software registered and activated.
It is recommended to use the on-line activation method because it is faster and more comfortable.
Maximum number of activations reached for this registration key.
Activation Error
Error while communicating with the activation server.
Please contact the developer about your license.
The application already activated with this registration key on 5 different configurations.
Error while reading data from the activation server.
Activation is not possible.
Activation done, thank you for your support.
Activation Successful
Activation By E-mail
Under Windows 98, it is possible that an USB device is causing this problem because the USB device may cause problems with S.M.A.R.T. on the secondary IDE channel.
The disk is not responding.
The disk is not responding for a long time. It may be disconnected.
Show application on both Task Bar and System Tray
Analysing system. Please wait.
Help
Please enter your registration name (your name or nickname) and registration key you received. If your computer has an active internet connection, please select on-line activation: this case the registration and activation is automatic, no other actions needed. Otherwise, please select the e-mail activation method and send the displayed file to the author. You'll receive your activated keyfile, please put it into the folder of the application.
Event
Interface translated by:
_translator name_
_translator email_
E-mail
TXT files
All files
Icon should be red if temperature is over
A&dvanced Options
Detection frequency:
1 second
5 seconds
10 seconds
30 seconds
1 minute
2 minutes
5 minutes (default)
10 minutes
30 minutes
1 hour
Enable warning if the hard disk is not responding
Average Temperature (today):
Current
Daily Average
Daily Maximum
Sound alert
Select Sound File
Sound files
Double click or right click to display more information.
Adjust
OK
Cancel
Error occurred while performing this command.
This feature requires Windows 2000, XP or newer operating systems.
When free disk space is low
Set Free Disk Space Threshold
Use same setting for all installed hard disks
Global setting
Warning if free space is less than
Low disk space
Low
Disable automatic scandisk upon start of Windows
It is required to restart the computer to apply new settings.
Synchronize computer clock with an atomic clock
When the application is started
Do you want to view the status of hard disk(s) in a small status window?\n(Later it is possible to change this setting by a right click\non the system tray icon and selecting "Configuration" from the menu.)
Temperature is not supported on this hard disk.
Cannot be determined on this hard disk.
&Help
Help is not available. Please download the full installation package from the website of the application.
This function is not available on the selected hard disk.
Modify default hard disk icons in Windows Explorer
SCSI Information
Vendor Information
Version
Device Type
Disk
Removable
Failure Prediction
Fixed Disk
Remote Drive
Optical Storage
The marked logical drives belong to the current physical hard disk.
Change display mode
Volume label
Serial number
Monitor space on network disks
Hot &Keys
Command
Enable system hot keys (can be used from any application)
Disk &Control
Change default system icon for network disks
Monitor space on removable disks
Change default system icon for removable disks
Do not examine space information of the following disks: (eg: CDE)
Do not change default system icon of the following disks: (eg: KL)
Double click to open a drive. F5 to Refresh.
No disk in drive
Mail Test
If this message is delivered, the e-mail configuration is correct.
Test mail successfully sent.
Error while sending test mail. Please verify the e-mail configuration.
Power on time:
days
hours
minutes
Estimated remaining lifetime:
more than
seconds
Port:
Delay before starting scandisk (seconds):
Health value:
When disk health is low
Panic backup
Health threshold:
Display message on screen
Send message to remote computer (NET SEND):
This function is available only if PROFESSIONAL version is installed.\nBy using this function, it is possible to start pre-configured backup operation(s) when a problem is found.\n\nPlease visit the homepage (www.hdsentinel.com) to read more about this feature.
Low health
Create Test Report
Error while sending the report.\nPlease open Configuration window, select Send test report, save the report and send it to reports@hdsentinel.hu
&Message Settings
Send E-mail
Dial up the default internet connection before sending
Close connection after sending
Display custom message from text file also
Please wait, measuring ...
Invalid registration details - this function is disabled.
Health Information
Error while saving. The disk may be full or read-only.
Thresholds / Tray &Icon
Display hard disk temperature on tray icon
Below
Between \1 and \2
Temp.:
Above
Use classic (digital) tray icon numbers
Background
Foreground
Example
Display hard disk health sign on tray icon
Application Information
Current Date And Time
System Information
Windows Version
CPU Type & Speed
BIOS Manufacturer
Physical Memory Size
Display Adapter
Display Resolution
Printer
Network Controller
PCI Device Information
Computer Information
Computer Name
User Name
IP Address
MAC Address
Physical Disk Information
Flags
Critical
Statistical
Performance
Error-Rate
Event Count
Self Preserving
Desktop
Server
Mobile
Computer Type
General Information
HTML files|*.html|All files|*.*
Save Report
Send Report in E-mail
Report type:
Detailed HTML report
Brief text report
Send &Test Report
Hard disk information to display
Hard Disk Model
Logical Drive(s)
Health
Status / Problem
Physical Disk(s)
The status of the hard disk is unknown.
The status of the hard disk is perfect.
The status of the hard disk is not perfect.
Failure expected on this hard disk.
There are \1 bad sectors on the disk surface. The contents of these sectors were moved to the spare area.
Based on the number of remapping operations, the health of the disk was decreased in different steps.
Based on the number of remapping operations, the bad sectors may form continuous areas.
The drive found \1 bad sectors during its self test.
Problems occurred during the spin up of the disk \1 times. This can be caused by the disk itself or huge power load (weak power supply).
There are \1 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
Problems occurred between the communication of the disk and the host \1 times. In case of a sudden crash or reboot it is recommended to try a different, short data cable (avoid round cables, use 80 wire standard cables instead).
It is recommended to examine the log of the disk regularly. All new problems found will be logged there.
The hard disk status is PERFECT. Problematic or weak sectors were not found and there are no spin up or data transfer errors. 
Apply
Offset
Offset:
It is recommended to calibrate the temperature and set the temperature offset on the S.M.A.R.T. page. This way later the correct temperature value will be displayed. 
Health calculation method:
Analyse data field (default)
Analyse vendor-specific values (NOT RECOMMENDED)
Threshold exceed on:
Attribute graph
Display data field
Display vendor specific values
Not expected
Happened
Detailed text report
File
View
Report
Save TXT report
Save HTML report
Send TXT report
Send HTML report
It is recommended to continuously monitor the hard disk status.
Analyse data field (more strict, recommended for servers)
Modify Attribute Offset 
The use of this option is recommended only for advanced users. By using this option, the displayed status may not reflect the actual condition. Are you sure you want to change this option?
Do not show this again
The use of this option is recommended only for advanced users. By using this option it is possible to display an incorrect condition and also possible to miss some alerts about further condition changes. Are you sure you want to change this option?
Disable sound alerts
Enable sound alerts
Error occurred while setting acoustic level.\nThe hard disk controller or its driver do not support this function.
Real time performance monitoring is not supported on this disk.
Note: the unregistered version does not store changes of these options. The settings will be reset to default values when the application is restarted.
Enable Attribute
Repeat sound alert
Use PC Speaker
Send Test
The message successfully sent to the target computer.
Error occurred during the operation. Please verify the network connection and the running status of the messenger service on both computers.
Problems Caused Sound Alert
Re-enable alerts
ATA Control Byte
Valid
Invalid
ATA Checksum Value
the displayed information may not be correct.
Test Sound Alert
Make a shortcut for this project to the desktop
Shortcut Creation
A shortcut for this project has been successfully created on the desktop.
Error while creating the shortcut for this project.
The registration information is expired. Please contact the author to extend the license.
Send mouse clicks to window under status window
Display information on desktop
License valid:
Forever
Expired
None
Fully transparent background
I&ntegration
Service
Password required to open main information window
Password required to open configuration window or to close Hard Disk Sentinel
Log out after
minutes
Password:
Log &Out Now
Use As &Service
Use As &Application
Remote Control
Enable remote connection to Hard Disk Sentinel server
Server name or IP address:
TCP port (default = 61210):
Protection
Error while installing Hard Disk Sentinel service.
Error while starting Hard Disk Sentinel service.
Error while stopping Hard Disk Sentinel service.
Hard Disk Sentinel now saves the current configuration and will be closed. It will be re-started as a service.
Hard Disk Sentinel service now saves the current configuration and will be stopped. It will be re-started as an application.
Authorized Access Required
Invalid password entered. It is not possible to use this function.
To close Hard Disk Sentinel service, please use the "Stop service" shortcut or switch back to Application mode on the Integration panel from the Configuration window and close the application.
No
High
Maximum
Update is not available when running Hard Disk Sentinel as service. Please switch back to Application mode on the Integration panel before updating the application to a new version.
Service mode
Safe mode (disable hardware detection)
Hard Disk Sentinel service is not installed. Please open the Configuration window, select Integration panel and install Hard Disk Sentinel service.
Hard Disk Sentinel service is already running.
Hard Disk Sentinel service is not running.
Average Transfer Rate
Average Disk Activity
Repeat Test
Information not yet available
Hard Disk Sentinel service stopped.\nDo you want to disable the service and use the software in Application mode?
Microsoft Vista and newer operating systems do not allow services to interact with the desktop.\n\nHard Disk Sentinel will run invisibly: its windows and icons will not be\ndisplayed and it will not be possible to access configuration.\n\nTo stop the service and use the software in Application mode,\nplease select the "Stop service" shortcut from Hard Disk Sentinel group.\n\nAre you sure you want to continue?
Find out how this value is calculated
Please enable this application to run with the proper rights.
Disk icon set:
XP
Vista
Click To Start
Hard Disk Test
Test operation:
Status:
Estimated time remaining:
Error while starting the test. The error code is:
Running, No Problems Found
Response:
Elapsed time:
This registration key can be used only to register the STANDARD version.\nPlease download and install the STANDARD version from www.hdsentinel.com\nto use this registration key.
This registration key can be used only to register the PROFESSIONAL version.\nPlease download and install the PROFESSIONAL version from www.hdsentinel.com\nto use this registration key.
Use megabytes unit for threshold
Confirm:
The two passwords are not the same.\nPlease enter the same password two times to confirm it.
Enable WebStatus
Ask for password to establish connection
HTTP connection port
Port Address (>1023)
Attribute comments
Decimal data fields
The drive tried to examine and reallocate data sector(s) \1 times. The examined data area is perfect.
Replace hard disk immediately.
Detailed report components:
Backup / Restore Current Configuration
Backup Configuration
Restore Configuration
Optical Drive
Generate and update XML file
The hard disk temperature sensor is wrong. The measured value is:
Accept remote connections from server
Remote connection port
Disable tray icon bubble alerts
Disable detection of USB and SCSI drives
Send
Comments:
Send To Developer
Contacting server - www.hdsentinel.com
Sending report
Report successfully sent. \nThank you for your support.
Send Test Report To Developer 
Creating report
I want to receive response after evaluating report
This is a bug report
Open HD Sentinel &Main Window
Visible
Hard Disk Size Unit:
Partition Size Unit:
CC (carbon copy):
BCC (blind carbon copy):
Update Test Report
(estimated)
Calculating time, please wait ... The current estimated value may not be accurate.
Remote path
Yellow temperature level reached.
Red temperature level reached.
Yellow health level reached.
Red health level reached.
Limit:
Temperature:
Attribute changed
Clear Log
Background
Enable DynDNS Service
Enable No-IP Service
Enable Custom Dynamic DNS Service
Configure
Username
Password
Hostname (full)
Full URL to update (%ip% changed with current IP)
Last Server Response:
Gadget
Enable Gadget
Display Header
Display Disk Activity
Do you want to test the configuration now by updating the IP address?
The number of found problems is high at the following attribute:
Read:
Write:
All Disks
Activity Icon
Display total disk activity on a single tray icon
(HIGH word)
(MID word)
(LOW word)
Power State:
Active
Sleeping
(since \1)
System Uptime
System Up Since
Disk Controller
Disk Location
Visit Our &Website
Contact
Buy Now
Enter Registration Key
The list contains \1 items. Please register the software to view all items.
CPU Usage
CPU
Virtual Memory
Used:
The hard disk is operating in PIO mode which reduces performance. It is recommended to check and replace data cable or modify the configuration.
The hard disk is operating in UDMA mode 2 (33 Mbytes/sec) which reduces performance. It is recommended to use a 80 conductor IDE cable if the controller supports higher data transfer rate(s).
Silicon Image (SiI) controllers may not provide complete information about all connected disks. 
The current disk controller driver does not provide full access to the disk itself to read all details. Please check if there is an updated driver available.
This USB storage device does not provide more information about itself. Anyway, it can be tested for problems by Disk -> Surface test function.
This RAID array does not provide access to disk details in the array. Anyway, it can be tested for problems by Disk -> Surface test function.
Please use the "Report" menu "Send test report to developer" option to help us determining if it is possible to detect and display more information.
Please visit the "Hardware" and "Support -> FAQ" sections on www.hdsentinel.com for details.
Enable
Maximum Temperature (ever measured):
Minimum Temperature (ever measured):
2 hours
4 hours
6 hours
8 hours
12 hours
Reserved 1
Reserved 2
Yellow temperature limit reached. If the drive temperature still increases, then it is recommended to use a hard disk cooling device (for example a fan or passive heatsink) if possible.
Select "Thresholds / Tray Icon" page to configure health and temperature thresholds for yellow and red levels.
Critical
It is recommended to backup immediately to prevent data loss.
Compact buttons
Normal buttons
Large buttons
Perf.:
Interface:
Message
Random Seek Test
Test drive seek performance, noise and temperature
Seek Time
Minimum
Maximum
Average
Test
Elapsed
Remaining
Operations
Errors
Start &Test
&Stop Test
Quick test
Normal test
Deep test
Long intensive test
Custom duration
Time to complete test (HH:MM:SS): 
READ Test
WRITE Test
This function can be used only once in the unregistered version.
Do you want to open the website of the software now for the details of registration?
Are you sure you want to stop this operation?
This function is not available on the selected drive because of the configuration of this controller and drives.
Hard Disk Sentinel Evaluation Version
The registered version of Hard Disk Sentinel offers highest level of data protection by alerts, disk diagnostics, automatic backup (PRO version only), remote management and further functions to test and increase stability and performance of storage devices.\n\nThis demo version should be used for up to 30 days to evaluate some of the most important functions and verify compatibility with the system. After that trial period, you should upgrade to a registered version by purchasing a license or stop using the software.\n\nBenefits of purchasing a licensed version:\n\n- highest level of data protection\n- fast, secure and flexible payment options\n- immediate access to all functions and unlock all features\n- free technical support and help\n- lifetime license, no subscription or renewal costs\n- no restrictions and annoying notices
S.M.A.R.T. offset is configured for an attribute used to calculate this value
&Select Tray Icon Font
Do not allow spin down of disks (numbers by comma, for example 1,2 or * to all)
Verify Online 
Compare S.M.A.R.T. values of this device with others (of the same model) to see if attributes are better or worse than the average
Surface Test
Analyse disk surface with different methods and tests
Disk surface map
Temperature and transfer speed
Block
Damaged
Progress
Pass
Time
Est.
sectors
Test stopped
Unable to lock the disk for exclusive use.\nAre you sure you want to test it anyway (NOT recommended)?
Test completed
Position
Sequential test
Test blocks from the beginning to the end
Random test
Test blocks in random order
Butterfly test
Alternating: test one block from the beginning and one from the end
Sequential backward test
Test blocks from the end to the beginning
Sector
Verify error
&Save disk information
&Load disk information
Initializing ...
Disk Contents Inspector
&Previous
&Next
&Go to ...
Please select the drive (accessible to the operating system) to be tested and the testing method.\nRead the detailed information carefully before starting the test.\nClick View for surface details, use the \1 or review previous test results.
Read test
Reads the disk surface to verify if all sectors are accessible and readable.\n\nThe test is safe, it does not affect stored data.\n\nDisk problems may remain hidden and revealed disk issues are NOT fixed (like with ScanDisk).
WRITE test
Overwrites the disk surface with configurable pattern. Forces the analysis of any weak sectors and verifies any hidden problems and fixes them by reallocation of bad sectors (this is drive regeneration).\n\nEnables better use of the disk as after the test the spare area will be used instead of any problematic sectors.
WRITE + read test
Overwrites the disk surface with configurable pattern and then reads back sector contents, to verify if they are accessible and consistent. Forces the analysis of any weak sectors and verifies any hidden problems and fixes them by reallocation of bad sectors (this is drive regeneration).\n\nEnables better use of the disk as after the test the spare area will be used instead of any problematic sectors.
Read + WRITE + read test (refresh data area)
Reads stored data from each blocks, writes back the contents and finally reads the information and compare with original contents. By the extensive test, an additional write cycle is used before writing back the contents to improve the efficiency of the error correction (drive regeneration).\n\nThe operation is usually safe for the stored information but data loss may occur if the system is not stable and/or upon power failure, overclocking, memory/power supply/cable problems and other factors.\n\nThe test can be used to refresh the data area of the storage device, without the need of complete erase but it is still recommended to backup important data before this test.
Reinitialize disk surface
Overwrites the disk surface with special initialization pattern to restore the sectors to default (empty) status and reads back sector contents, to verify if they are accessible and consistent. Forces the analysis of any weak sectors and verifies any hidden problems and fixes them by reallocation of bad sectors (this is drive regeneration).\n\nEnables better use of the disk as after the test the spare area will be used instead of any problematic sectors.\nVery intensive and time-consuming test, especially if the level (the number of overwrite cycles) is set to higher value.\n\nThe simple version of this test is usually (incorrectly) called as low level format by other tools.
Sector Order
Non-destructive - safe to data
Lock drive during test (unmount volumes)
Repeat test
times
Limit testing to specific data blocks
First block:
Last block:
DESTRUCTIVE - all data will be removed
Empty data (zeroes)
Random data
Sector number
Extensive read-write-read test with additional write operation
Surface reinitialization level
Most cases non-destructive (see notes and Help) 
This test will permanently destroy ALL DATA on the selected drive.\nThe function cannot be undone.\n\nAre you sure you want to perform this test and lose ALL DATA stored on the drive?
This test performs WRITE operation on the selected drive.\nThe test itself is not destructive but data loss may occur.\n\nAre you sure you want to perform this test?
Test Confirmation 
Click on the surface map to inspect sector contents.\n\nRight click to open context menu.
The test measures transfer time for all blocks to reveal which areas of the surface are slower. As the block is slower, the associated color is darker.
The developer offers no warranty on the stored data on any disks.
Current pass
All passes
Cannot perform write test on system drive containing any of the following folder(s)
The loaded information belongs to a different drive.\nHowever upon mouse click on the surface map, sectors of the the current drive are displayed.
At this point, warranty replacement of the disk is not yet possible, only if the health drops further.
Do you want to wake up all sleeping hard disks also?\nOtherwise only information of active disks will be updated.
Update Disk Information
Test type:
Data impact:
Write Pattern
Reset maximum and minimum temperature values
Maximum Temperature (during entire lifespan):
Show values
Use SSL
SSD Controller
The status of the solid state disk is PERFECT. Problematic or weak sectors were not found. 
The health is determined by SSD specific S.M.A.R.T. attribute(s): 
Manage Disk Features
Error occurred while sending the command to the disk.\nThe disk controller or its driver does not support this function.\n\nThe command may be completed after a driver update or\nwhen using a different OS, different disk controller\nor a supported USB enclosure / docking station.
Enable and Adjust
Disable
Pre-start delay (seconds):
Custom Temperature Thresholds
Yellow temperature limit:
Red temperature limit:
Disable custom thresholds for the selected disk
Set custom temperature thresholds
Modify custom temperature thresholds
Custom
Global
Only one disk may have custom temperature threshold configured in this free version of Hard Disk Sentinel.
The S.M.A.R.T. driver is missing from the current Win9x/ME system.\nDo you want to automatically update the configuration and restart the computer now?
Load Activated Keyfile
NTFS Mount Point(s)
Mount Point
Attention: your data may not be fully protected.
Limited time offer: Upgrade today and save \1 on license fee!
(enter coupon code \1 during secure online registration or click the link below)
Please wait \1 second(s) before continue ...
Volume Information
Partition Style
Active
Alignment
Start Offset
Length
Allocation Unit Size
Total Allocation Units
Free Allocation Units
Used Allocation Units
Volume Type
Dynamic
Basic
&Open status of offline disk(s)
Select disk(s) with the checkboxes to view their status just like connected (online) disk(s).
Offline
Select disk(s) with the checkboxes to be included in the authentic disk report.
&Save authentic disk report (HTML)
&Verify authentic disk report
The selected file is not an authentic disk report.
The authentic disk report successfully verified and valid.
The authentic disk report is invalid or corrupted.
Authentic Disk Report
&Windows Volume/RAID Information
\1 errors occurred during data transfer. This may indicate problem of the device or with data/power cables. It is recommended to examine and replace the cables if possible. 
\1 errors reported during write to the device.
The limitation of the RAID controller may prevent the detection of further disk information. This is not a limitation of Hard Disk Sentinel software.
Subscribe to newsletter to be notified about updates and special offers
Select Report menu -> Send test report to developer and select Subscribe to newsletter to receive information about special offers and updates.
Daily Minimum
Standard Width
The TRIM feature of the SSD is supported and enabled for optimal performance.
The TRIM feature of the SSD is supported but disabled. It is recommended to upgrade the operating system, the disk controller or its driver to improve performance.
Lifetime writes:
Total start/stop count:
The configuration does not provide further disk status information. However, "Disk" menu "Surface Test" function can examine the disk functionality, reveal and fix possible problems.
The current version expired. Please enter a registration key to continue using the software.
The log contains no entries.
Export transfer speed values
Automatically adjust setting on restart
More information:
Click to add comment ...
Comment
Change &folder to store statistics and settings
Duplicate License Warning
The same registration code is used for both the installed and the portable version of Hard Disk Sentinel.\nTo fully use the features of both versions, separate licenses are required for these versions.
Status last updated:
Online Warranty Check
Copy selected value to clipboard
Accessing some areas of the surface during the test may\nbe slower due to the active operating system and\napplications, this can cause darker green blocks.
Reset workload counters
Do you want to save separate reports for selected disk drives?
The detected total capacity (\1) of the drive \2 is not correct, the capacity should be \3.
The current disk controller/driver/adapter may not be fully compatible with \1
Using the drive may cause file system corruption and/or data loss.
It is recommended to check and modify the configuration or upgrade the operating system, hard disk controller and/or drivers to safely use this device.
Device Specific Information
The hard disk controller provides only a generic self-monitoring (S.M.A.R.T.) status, without additional details. 
The S.M.A.R.T. status is: 
Always on top
It is required to completely close by File -> Exit and restart to make this change take effect.
System Idle Time
The following error(s) detected:
The status information and possible error(s) provided by the hard disk (RAID) controller. This may be different from the status of the physical drive.
Auto-upload status to Server
System Management Information
The partition(s) on this hard disk created with \1 physical sector size.
but the current physical sector size is \1.
Connecting the hard disk differently than the current connection (by different hard disk controller, USB, eSATA connection) may cause that all folders and files will be unaccessible.
It is recommended to re-connect the hard disk as previously connected (probably with different USB adapter, enclosure, docking station or so) to access the partition with all stored data - otherwise data loss may occur.
Detect file information for sector
Unable to determine disk drive layout.
Unable to detect partition / logical drive information.
No partition defined on this sector (unused sector).
Unknown file
Unused sector on logical drive \1
Attributes:
Number of file fragments:
Detect file information for sectors with errors 
Detecting File Information
Detecting Disk Information
Most recent detected information
&Files on errors
years
months
Custom Health Thresholds
Yellow health threshold:
Red health threshold:
Set custom threshold
Modify custom threshold
Double click to adjust custom health thresholds
Drive Connection/Removal Event Log
The log shows all drive(s) connected and removed during active periods of Hard Disk Sentinel and shows changes in disk configuration when the software was inactive (detected on next startup).
Number of entries:
Date and time
Disk drive
When inactive
Connected
Removed
In case of sudden system crash, reboot, blue-screen-of-death, inaccessible file(s)/folder(s), it is recommended to verify data and power cables, connections - and if possible try different cables to prevent further problems.
Highest Possible Transfer Rate
Negotiated Transfer Rate





DMA=DMA
Ultra DMA=Ultra DMA
S.M.A.R.T.=S.M.A.R.T.
Security Mode=Security Mode
Power Management=Power Management
Write Cache=Write Cache
Host Protected Area=Host Protected Area
Advanced Power Management=Advanced Power Management
Advanced Power Management Level=Advanced Power Management Level
Current APM Level=Current APM Level
Extended Power Management=Extended Power Management
APM01=Minimum power consumption with standby
APM02=Intermediate power management levels with standby
APM80=Minimum power consumption without standby
APM81=Intermediate power management levels without Standby
APMFE=Maximum performance and power consumption
FreeFall01=Lowest sensitivity to free fall events
FreeFall02=Balanced sensitivity to free fall events
FreeFallFF=Highest sensitivity to free fall events
Current Sensitivity=Current Sensitivity
Power Up In Standby=Power Up In Standby
48-bit LBA Addressing=48-bit LBA Addressing
Device Configuration Overlay=Device Configuration Overlay
Read/Write DMA Queue=Read/Write DMA Queue
Native Command Queuing=Native Command Queuing (NCQ)
Read Ahead Buffer=Read Ahead Buffer
Maximum Multiword DMA Mode=Maximum Multiword DMA Mode
Active Multiword DMA Mode=Active Multiword DMA Mode
IORDY Support=IORDY Support
Maximum sectors transferred on R/W multiple=Maximum Sectors Transferred On R/W Multiple
Minimum multiword DMA transfer time=Minimum multiword DMA Transfer Time
Recommended multiword DMA transfer time=Recommended Multiword DMA Transfer Time
Minimum PIO transfer time without IORDY=Minimum PIO Transfer Time Without IORDY
Minimum PIO transfer time with IORDY=Minimum PIO Transfer Time With IORDY
Security Erase=Security Erase
Security Erase Time=Security Erase Time
Security Enhanced Erase Feature=Security Enhanced Erase Feature
Security Enhanced Erase Time=Security Enhanced Erase Time
Security Enabled=Security Enabled
Security Locked=Security Locked
Security Frozen=Security Frozen
Security Counter Expired=Security Counter Expired
Security Level=Security Level
Serial ATA Features=Serial ATA Features
Interface=Interface
S-ATA Compliance=S-ATA Compliance
S-ATA I Signaling Speed (1.5 Gps)=S-ATA I Signaling Speed (1.5 Gps)
S-ATA II Signaling Speed (3 Gps)=S-ATA II Signaling Speed (3 Gps)
Receipt Of Power Management Requests From Host=Receipt Of Power Management Requests From Host
PHY Event Counters=PHY Event Counters
Non-Zero Buffer Offsets In DMA Setup FIS=Non-Zero Buffer Offsets In DMA Setup FIS
DMA Setup Auto-Activate Optimization=DMA Setup Auto-Activate Optimization
Device Initiating Interface Power Management=Device Initiating Interface Power Management
In-Order Data Delivery=In-Order Data Delivery
Asynchronous Notification=Asynchronous Notification
Software Settings Preservation=Software Settings Preservation
Queue Length=Queue Length
Disk Family=Disk Family
Form Factor=Form Factor
Capacity=Capacity
Number Of Disks=Number Of Disks
Number Of Heads=Number Of Heads
Rotational Speed=Rotational Speed
RPM=RPM
Rotation Time=Rotation Time
Average Rotational Latency=Average Rotational Latency
Disk Interface=Disk Interface
Buffer-Host Max. Rate=Buffer-Host Max. Rate
Drive Ready Time (typical)=Drive Ready Time (typical)
Average Seek Time=Average Seek Time
Track To Track Seek Time=Track To Track Seek Time
Full Stroke Seek Time=Full Stroke Seek Time
Width=Width
Depth=Depth
Height=Height
Weight=Weight
grams=grams
pounds=pounds
Acoustic=Acoustic
Idle=Idle
Required power for spinup=Required power for spinup
Power required (seek)=Power required (seek)
Power required (idle)=Power required (idle)
Power required (standby)=Power required (standby)
Manufacturer=Manufacturer
Manufacturer Website=Manufacturer Website
; list of SMART features
S.M.A.R.T. Details=S.M.A.R.T. Details
Off-line data collection=Off-line Data Collection Status
OFF00=Never Started
OFF02=Successfully Completed
OFF03=Activity In Progress
OFF04=Suspended By Interrupting Command From Host
OFF05=Aborted By Interrupting Command From Host
OFF06=Aborted By Device With Fatal Error
Self test execution status=Self Test Execution Status
SET00a=Successfully Completed
SET00b=Never Started
SET01=Aborted By Host
SET02=Interrupted By Host With Hardware/Software Reset
SET03=Fatal/Unknown Error Occurred During The Test
SET04=Test Failed By Unknown Element
SET05=Test Failed By Electrical Element
SET06=Test Failed By Servo/seek Element
SET07=Test Failed By Read Element
SET08=Test Failed And Handling Damage Is Suspected
SET15=Test Is In Progress
SETCO=completed
Total time to complete off-line data collection=Total Time To Complete Off-line Data Collection
Execute off-line immediate=Execute Off-line Immediate
Abort/restart off-line by host=Abort/restart Off-line By Host
Off-line read scanning=Off-line Read Scanning
Short Self-test=Short Self-test
Extended Self-test=Extended Self-test
Selective Self-test=Selective Self-Test
Conveyance self-test=Conveyance Self-test
Save data before/after power saving mode=Save Data Before/After Power Saving Mode
Enable/Disable attribute autosave=Enable/Disable Attribute Autosave
Error logging capability=Error Logging Capability
Short Self-test Estimated Time=Short Self-test Estimated Time
Extended Self-test Estimated Time=Extended Self-test Estimated Time
Conveyance self-test estimated time=Conveyance self-test estimated time
Last Short Self-test Result=Last Short Self-test Result
Last Short Self-test Date=Last Short Self-test Date
Last Short Self-test Duration=Last Short Self-test Duration
Last Extended Self-test Result=Last Extended Self-test Result
Last Extended Self-test Date=Last Extended Self-test Date
Last Extended Self-test Duration=Last Extended Self-test Duration
Last Conveyance Self-test Result=Last Conveyance Self-test Result
Last Conveyance Self-test Date=Last Conveyance Self-test Date
Last Conveyance Self-test Duration=Last Conveyance Self-test Duration
NOP Command=NOP Command
Trusted Computing=Trusted Computing
64-bit World Wide ID=64-bit World Wide ID
Streaming=Streaming
Media Card Pass Through=Media Card Pass Through
General Purpose Logging=General Purpose Logging
Error Logging=Error Logging
CFA Feature Set=CFA Feature Set
Long Physical Sectors=Long Physical Sectors
Long Logical Sectors=Long Logical Sectors
Write-Read-Verify=Write-Read-Verify
NV Cache Feature=NV Cache Feature
NV Cache Power Mode=NV Cache Power Mode

# added 4 Nov 2008 
Transport Version=Transport Version
NV Cache Size=NV Cache Size
Free-fall Control=Free-fall Control
Free-fall Control Sensitivity=Free-fall Control Sensitivity
Non-rotating Media (SSD)=Non-rotating Media (SSD)
Nominal Media Rotation Rate=Nominal Media Rotation Rate
S-ATA Gen3 Signaling Speed (6 Gps)=S-ATA Gen3 Signaling Speed (6 Gps)

# added 19 Jun 2009
CFast Device=CFast Device
SSD Features=SSD Features
Data Set Management=Data Set Management
TRIM Command=TRIM Command
Deterministic Read After TRIM=Deterministic Read After TRIM

Operating System TRIM Function=Operating System TRIM Function

# added 3 Oct 2011

Self-Test Results=Self-Test Results
SST05=First Segment of the Test Failed
SST06=Second Segment of the Test Failed
SST07=Self Test Failed at Test Segment
SSTN=Self-Test Segment
SSTN0=No Segment ID Available
SSTH=Power On Hours
SSTL=Failure Address (LBA)
SSHL=The hard disk reports the following problems:


SA1=Errors occurred while reading raw data from a disk\Indicate problem with the disk surface or the read/write heads.
SA2=General throughput performance of the hard disk\Indicate problem with motor, servo or bearings.
SA3=Time needed by spindle to spin-up to full RPM\Indicate problem with motor or bearings.
SA4=Count of start/stop cycles of spindle\This value does not directly affect the condition of the drive.
SA5=Count of sectors moved to the spare area\Indicate problem with the disk surface or the read/write heads.
SA6=Margin of a channel while reading data\The exact function of this attribute is not specified.
SA7=Rate of positioning errors of the read/write heads\Indicate problem with servo, head. High temperature can also cause this problem.
SA8=Average time of seek operations of the heads\Indicate problem with servo.
SA9=Total time the drive is powered on\The unit of the measure depends on the manufacturer.
SA10=Retry count of spin start attempts\Indicate problem with motor, bearings or power supply.
SA11=Number of attempts to calibrate a drive\Indicate problem with motor, bearings or power supply.
SA12=Number of complete power on/off cycles\This value does not directly affect the condition of the drive.
SA13=Number of software read errors\The number of uncorrectable read errors.
SA184=Number of parity errors during transfer between the cache RAM and the host.
SA187=Errors that could not be recovered using hardware error correction methods.
SA187MTRON=Virtual block erase count\Indicate the wear of the storage device.
SA188=Number of aborted operations due to HDD timeout. Value larger than zero may indicate power supply or data cable connection problems.
SA189=Number of unsafe write operations outside the normal head flying range.
SA190=Airflow temperature\The temperature of the air inside the hard disk housing.
SA191=Number of mechanical errors\Number of errors resulting from shock or vibration.
SA192=Count of power off cycles\This value does not directly affect the condition of the drive.
SA193=Count of load/unload cycles\Number of cycles the head moved into landing zone position.
SA194=Disk temperature\The temperature inside the hard disk housing.
SA195=Count of correctable errors\Number of errors corrected by the internal error correcting mechanism.
SA196=Count of sector remap operations\Number of all (successful and failed) remap operations.
SA197=Count of unstable sectors\These pending sectors may be remapped to the spare area.
SA198=Count of uncorrectable errors when reading/writing\Indicate problem with the disk surface or the read/write heads.
SA199=Count of errors during data transfer between disk and host\Indicate problem with the power supply or data cable.
SA200=Errors occurred while writing raw data to the disk\Indicate problem with the disk surface or the read/write heads.
SA201=Number of software read errors\The number of uncorreactable read errors.
SA202=Number of data address mark errors\Number of incorrect or invalid address marks.
SA203=Number of data correction errors\Invalid error correction checksum found during error correction.
SA204=Number of corrected data errors\Errors corrected by the internal error correction mechanism.
SA205=Number of thermal problems\Total number of problems caused by high temperature.
SA206=Head flying height\The height of the disk heads above the disk surface.
SA207=Current value during spin up\The current needed to spin up the drive.
SA208=Number of cycles needed to spin up\The number of retries during spin up because of low current available.
SA209=Drive performance during offline operations\The seek performance of the drive during internal self tests.
SA211=Vibration encountered during write operations.
SA212=Shock encountered during write operations.
SA220=Distance of the disk has shifted relative to the spindle\Incorrect disk spin can be cause by mechanical shock or high temperature.
SA221=Number of mechanical errors\Number of errors resulting from shock or vibration.
SA222=Number of powered on hours\This value is constantly increasing (once per every hour).
SA223=Number of load/unload operations\The number of drive head enters/leaves the data zone.
SA224=Mechanical friction rate\The rate of friction between mechanical parts. Indicate problem with the mechanical subsystem of the drive.
SA226=Total time the heads are loaded\The time while the read/write heads are in the data zone.
SA227=Rate of torque increase\Torque increase during the spin up operation of the hard disk.
SA228=Number of power off cycles\The number of times the head was retracted as a result of power loss.
SA230=Head positioning amplitude\Head moving distances between operations.
SA231=Disk temperature\The temperature inside the hard disk housing.
SA240=Number of head positioning hours\Time spent during the positioning of the drive heads.
SA250=Number of retries during read operations\Number of errors found during reading a sector from disk surface.
SA254=Number of free fall events detected by the accelerometer sensor.
SA255=Vendor-specific\The function and value of this attribute are determined by the manufacturer.

SC01=Buffer over/under run counters
SC02_0000=Write errors corrected without substantial delay
SC02_0001=Write errors corrected with possible delays
SC02_0002=Total write errors
SC02_0003=Total write errors corrected
SC02_0004=Total write errors corrected by algorithm
SC02_0005=Total bytes written
SC02_0006=Total uncorrected write errors
SC03_0000=Read errors corrected by ECC hardware method
SC03_0001=Read errors corrected with possible delays
SC03_0002=Total read errors
SC03_0003=Total read errors corrected
SC03_0004=Total read errors corrected by algorithm
SC03_0005=Total bytes read
SC03_0006=Total uncorrected read errors
SC04_0000=Read reverse errors corrected by ECC hardware method
SC04_0001=Read reverse errors corrected with possible delays
SC04_0002=Total read reverse errors
SC04_0003=Total read reverse errors corrected
SC04_0004=Total read reverse errors corrected by algorithm
SC04_0005=Total bytes read reverse 
SC04_0006=Total uncorrected read reverse errors
SC05_0000=Verify errors corrected without substantial delay
SC05_0001=Verify errors corrected with possible delays
SC05_0002=Total verify errors
SC05_0003=Total verify errors corrected
SC05_0004=Total verify errors corrected by algorithm
SC05_0005=Total bytes verified
SC05_0006=Total uncorrected verify errors
SC06_0000=Non medium errors
SC07=Last error event
SC0B=Last deferred error or asynchronous event
SC0D_0000=Temperature
SC0D_0001=Reference temperature
SC0E_0001=Manufacture date (year/week)
SC0E_0002=Accounting date
SC0E_0003=Specified cycle count over device lifetime
SC0E_0004=Accumulated start-stop cycles
SC0E_0005=Specified load-unload count over device lifetime
SC0E_0006=Accumulated load-unload cycles
SC0F=Application client parameter data
SC10=Self test results log
SC11_0001=Percentage used endurance indicator
SC18=Protocol specific port log
SC1A_0001=Accumulated transitions to active
SC1A_0002=Accumulated transitions to idle_a
SC1A_0003=Accumulated transitions to idle_b
SC1A_0004=Accumulated transitions to idle_c
SC1A_0008=Accumulated transitions to standby_z
SC1A_0009=Accumulated transitions to standby_y
SC37_0000=Blocks sent to initiator
SC37_0001=Blocks received from initiator
SC37_0002=Blocks read from cache and sent to initiator
SC37_0003=I/O commands with size smaller than segment size
SC37_0004=I/O commands with size larger than segment size
SC3E_0000=Power on time
SC3E_8000=Power on time
SC3E_0008=Remaining minutes until next internal test

## added 13 May 2015 ##

Motherboard=Motherboard
Product=Product
Asset Tag=Asset Tag
Memory Module=Memory Module
Chassis=Chassis


## added 22 Feb 2017 ##

Disk repair=Disk repair
Repair=Repair
Repair successful=Repair successful
Repair failed=Repair failed
\1 sector(s) successfully repaired.=\1 sector(s) successfully repaired.
read test with sector repair=read test with sector repair
RepairDesc=Reads the disk surface to verify if all sectors are readable and forces the disk drive to repair any problematic (pending, weak) sectors: restore the status to good or reallocate (replace from spare area) if required to prevent further use of the original sector.\n\nThe test is safe for stored data and the damaged file(s) will be readable, however file fragment(s) on damaged sectors may be corrupted. File(s) on the affected repaired sectors are listed when the test completed.\n\nThe test is best to be used to repair drives with weak sector(s) without the need of complete backup (and use of the Reinitialize disk surface test) and works on both system and secondary drives too.
Multiple disk drives=Multiple disk drives
\1 drive(s) selected=\1 drive(s) selected
Select disk drive(s) to be tested=Select disk drive(s) to be tested
Are you sure you want to perform disk testing on multiple disk drives?=Are you sure you want to perform disk testing on multiple disk drives?
Do you want to EXLCLUDE the system drive and test only additional drive(s)?=Do you want to EXCLUDE the system drive and test only additional drive(s)?
Byte / byte sequence=Byte / byte sequence
Maximum try count=Maximum try count
Add to Windows event log=Add to Windows event log
Provide status information by WMI=Provide status information by WMI
Automatic detection based on disk utilization=Automatic detection based on disk utilization
Automatically save disk test results to folder=Automatically save disk test results to folder
Selected disk only=Selected disk only
Please verify your firewall settings and make sure the software can access the activation server and try again later.\n\nAlternatively, you may use the Registration And Activation By E-mail button to activate by e-mail.=Please verify your firewall settings and make sure the software can access the activation server and try again later.\n\nAlternatively, you may use the Registration And Activation By E-mail button to activate by e-mail.
Control device-specific detection=Control device-specific detection
Select device type to detect status and health information by the appropriate detection method.=Select device type to detect status and health information by the appropriate detection method.
DeviceSpecificDesc=Hard Disk Sentinel saves a flag-file (zero bytes, without using disk space) on the device to record the selected device type. It is used in subsequent detections until the device is completely erased / formatted, when it is required to select device type again.
Note=Note
Complete erase / re-format does not reset the health and statistics.=Complete erase / re-format does not reset the health and statistics.
Selecting improper device type may cause unnecessary wear to flash-based device and may result in data corruption.=Selecting improper device type may cause unnecessary wear to flash-based device and may result in data corruption.
Auto Detect=Auto Detect
Part number(s)=Part number(s)
Device type detection successfully completed.=Device type detection successfully completed.
The device does not respond to detection, further status information cannot be detected.=The device does not respond to detection, further status information cannot be detected.
Running=Running
Inactive=Inactive
without monitoring=without monitoring


## added 18 Dec 2017 ##

Monitor Windows Event Log for problems related to disks and storage=Monitor Windows Event Log for problems related to disks and storage
Configure NAS Disk Monitoring=Configure NAS Disk Monitoring
Specify Status Source(s) to monitor Network Attached Storage (NAS) disk drives.=Specify Status Source(s) to monitor Network Attached Storage (NAS) disk drives.
Status Source files contain complete status of hard disk drives, SSDs, storage devices and Hard Disk Sentinel reads them to show the appropriate disk drives like if they would be connected directly.=Status Source files contain complete status of hard disk drives, SSDs, storage devices and Hard Disk Sentinel reads them to show the appropriate disk drives like if they would be connected directly.
Status Source files saved and updated on the NAS device, created by (for example) Hard Disk Sentinel Linux version.=Status Source files saved and updated on the NAS device, created by (for example) Hard Disk Sentinel Linux version.
The Auto Detect function automatically detects possible Status Source files (HDSReport.html) on available network drives.=The Auto Detect function automatically detects possible Status Source files (HDSReport.html) on available network drives.
Status Source=Status Source
Auto Detect=Auto Detect
&Browse=&Browse
Add &URL=Add &URL
&Edit=&Edit
&Delete=&Delete
&Test=&Test
Status source files=Status source files
HPA Security Extensions=HPA Security Extensions
Service Interrupt=Service Interrupt
IDLE IMMEDIATE command with UNLOAD feature=IDLE IMMEDIATE command with UNLOAD feature
Nominal Form Factor=Nominal Form Factor
Additional Product Identifier=Additional Product Identifier
Read Zeroes After TRIM=Read Zeroes After TRIM
Device Encrypts All User Data=Device Encrypts All User Data
Sanitize=Sanitize
Overwrite=Overwrite
Crypto Scramble=Crypto Scramble
Block Erase=Block Erase
Sanitize Antifreeze Lock=Sanitize Antifreeze Lock
ACS-3 Commands Allowed By Sanitize=ACS-3 Commands Allowed By Sanitize
NCQ Streaming=NCQ Streaming
NCQ Autosense=NCQ Autosense
Automatic Partial to Slumber Translations=Automatic Partial to Slumber Translations
Rebuild Assist=Rebuild Assist
Hybrid Information=Hybrid Information
Device Sleep (DevSleep)=Device Sleep (DevSleep)
DevSleep to ReducedPwrState=DevSleep to ReducedPwrState
Recently the following entries added to System Event Log:=Recently the following entries added to System Event Log:
errors=errors
most recent=most recent
warnings=warnings
The following function can be used to improve the situation:=The following function can be used to improve the situation:
Certain detection functions to access disk status disabled.=Certain detection functions to access disk status disabled.
Please change the following option:=Please change the following option:

## added 28 Jun 2018 ##

Do you want to update now?=Do you want to update now?
Update not selected.=Update not selected.
Controlled Folder Access feature of Windows Defender prevents accessing disk status information.=Controlled Folder Access feature of Windows Defender prevents accessing disk status information.
Do you allow Hard Disk Sentinel to detect and diagnose disk status by adding to the list of allowed software (recommended) ?=Do you allow Hard Disk Sentinel to detect and diagnose disk status by adding to the list of allowed software (recommended) ?
Note: without this permission, unstable operation and limited functionality will likely occur.=Note: without this permission, unstable operation and limited functionality will likely occur.
Disk Access Blocked=Disk Access Blocked

## added 22 Jan 2020 ##

NVMe Namespace Information=NVMe Namespace Information
Total Sectors=Total Sectors
Active LBA Format Index=Active LBA Format Index
LBA Formats Supported=LBA Formats Supported
LBA Format List=LBA Format List
Best=Best
Better=Better
Good=Good
Degraded=Degraded
Zoned Capabilities=Zoned Capabilities
SCT Command Transport=SCT Command Transport
SCT Error Recovery Control=SCT Error Recovery Control

## added 13 Oct 2020 ##

Include problem overview in alerts=Include problem overview in alerts
Alert about problematic drive(s) only=Alert about problematic drive(s) only

## added 15 Feb 2022 ##

Change(s) since \1=Change(s) since \1
Timestamp=Timestamp
No entries found=No entries found
Error log=Error log
No error information recorded=No error information recorded
The list automatically cleared by the controller on power cycle and reset=The list automatically cleared by the controller on power cycle and reset
Depending on the configuration, the test duration may be different than estimated.=Depending on the configuration, the test duration may be different than estimated.
The NVMe controller driver prevents using test commands too frequently. Please try again later.=The NVMe controller driver prevents using test commands too frequently. Please try again later.

No device self-test operation in progress=No device self-test operation in progress
Aborted by command=Aborted by command
Aborted by controller reset=Aborted by controller reset
Aborted due to removal of namespace=Aborted due to removal of namespace
Aborted due to Format NVM command=Aborted due to Format NVM command
Fatal error or unknown test error=Fatal error or unknown test error
Failed in an unknown test segment=Failed in an unknown test segment
Failed in one or more test segment(s)=Failed in one or more test segment(s)
Aborted for unknown reason=Aborted for unknown reason
No self-test information recorded=No self-test information recorded

Repaired=Repaired
Failed=Failed
Quick Fix=Quick Fix
QuickFixDesc=Verify which area(s) of the disk drive reported problems and written recently then diagnose, repair specifically those (and nearby) sectors and critical system areas. The test forces the disk drive to repair any problematic (pending, weak) sectors: restore the status to good or reallocate (replace from spare area) if required to prevent further use of the original sector.\n\nUnlike a complete scan, this test may not able to find and correct all possible problems, so best used on disk drives with relatively low number of problems and high Health value reported to repair weak sector(s) without the need of complete backup (and use of the Reinitialize disk surface test).\n\nThe test can be used on both system and secondary drives and it is safe for stored data. Possible damaged files will be readable, however file fragment(s) on damaged sectors may be corrupted. File(s) on the affected repaired sectors are listed when the test completed.

targeted repair of problematic sectors=targeted repair of problematic sectors
Last error (hour)=Last error (hour)
Error free hours=Error free hours
Never=Never
Open Disk Management=Open Disk Management
Open Device Manager=Open Device Manager
Windows Drive Index=Windows Drive Index

## added 30 Nov 2022 ##

USB Device Name=USB Device Name
safely remove required=safely remove required
surprise remove possible=surprise remove possible
The current USB connection limits the speed of the disk drive. Connect to a different USB 3.0 port to get higher performance.=The current USB connection limits the speed of the disk drive. Connect to a different USB 3.0 port to get higher performance.
The drive can degrade or fail when used with the current USB port which may not provide enough power for proper operation.=The drive can degrade or fail when used with the current USB port which may not provide enough power for proper operation.
The disk drive reached the end of the designed lifetime. Chance of sudden, unforeseen failure is higher.=The disk drive reached the end of the designed lifetime. Chance of sudden, unforeseen failure is higher.
In a critical system, it is recommended to consider replacement.=In a critical system, it is recommended to consider replacement.
One or more disk drive(s) may be disconnected or removed.=One or more disk drive(s) may be disconnected or removed.
Probably the disk drive is not a real storage device: it shows very high available capacity, but data saved on it can be corrupted / lost.=Probably the disk drive is not a real storage device: it shows very high available capacity, but data saved on it can be corrupted / lost.